IMO member state audit scheme (IMSAS)

-
IMSAS :- It is seen as a key tool for assessing member states' performance in meeting their obligations and responsibilities as flag, port and coastal states under the relevant IMO treaties and then offering the necessary assistance where required, for them to meet their obligation fully and effectively. The mandatory IMO instruments included in the scope of the scheme cover SOLAS,MARPOL,STCW,Load lines, Tonnage and COLREG.
       The resolution was adopted at 28th assembly. The task of IMP sub committee on implementation of IMO instruments include





  1. review the rights and obligations of States emanating from the IMO treaty instruments;
  2. assess, monitor and review the current level of implementation of IMO instruments by States in their capacity as flag, port and coastal States, with a view to identifying areas where States may have difficulties in fully implementing them;
  3. identify the reasons for the difficulties in implementing provisions of relevant IMO instruments, taking into account any relevant information collected through, inter alia, the assessment of performance, the investigation of marine casualties and incidents and port State control (PSC) data, while paying particular attention to difficulties faced by developing countries;
  4. consider proposals to assist States in implementing and complying with IMO instruments by the development of appropriate instruments, guidelines and recommendations.
  5. analyse investigation reports into marine casualties and incidents and maintain an efficient and comprehensive knowledge-based mechanism to support the identification of trends and feed into the IMO rule-making process;
  6. review IMO standards on maritime safety and security and the protection of the marine environment, to maintain an updated and harmonized guidance on survey and certification related requirements; and
  7. promote global harmonization of PSC activities

  9. #Principlesofmarineinsurance, #marineengineering, #iappcertificate, #propellercurve, #criticalequipment #criticalequipmentlist, #conditionofassignment, #conditionsofassignment, #dynamicstabilityofship, 

    10. Comments

    Post a Comment

    Popular posts from this blog

    CRITICAL EQUIPMENT AND OPERATION UNDER ISM CODE.

    -
    Critical equipments are equipments whose failure will lead to a potential hazardous situation or an accident, thereby causing injury to personnel or loss of life or damage to marine environment or property. This causes deviation or failure of the ISM objective 1.2.2 of ISM code. PROVISION IN ISM :- Element 10.3 of ISM code states----      The company should establish procedures in its safety management system to identify equipment and technical system, the sudden operational failure of which may result in hazardous situation. The SMS should provide for specific measures aimed at promoting the reliability of such equipment or systems. These measures should include the regular testing of standby arrangement or equipment or technical systems that are not in continuous use.      Hence SMS must have with respect to the critical equipment have procedures:- 1) To identify them 2) To ensure their test and functional reliability 3) To establish and use th...
    Read more

    Various codes of PSC inspection and how to present to PSCO in case IOPP equipment is not working

    -
    Following are the various codes which are used to represent Action to be taken by vessel against the deficiency reported:- Deficiency Action Codes 10 deficiency rectified 15 rectify deficiency at next port 16 rectify deficiency within 14 days 17 rectify deficiency before departure 18 rectify deficiency within 3 months  30 detainable deficiency 99 other (specify) Note: For ISM deficiencies, only code 10, 18 and 30 can be used. Restrictions on Updating Codes Both codes 15 and 16 can only be updated to code 10. Code 17 can only be updated to code 10, 15, 16 and 99. Code 18 can only be updated to code 10. Code 30 can only be updated to: - code 10 or 18 (ISM def.) - code 10 or 99 (non - ISM def.) Code 18 can only be updated to code 10. We will discuss one case where 15 ppm equipment has started malfunctioning just before the arrival of the port. After investigating it was found that the  coalescer filter has become very dirty and because o...
    Read more

    CLEAR GROUND FOR DETAILED INSPECTION DURING PSC INSPECTION

    -
    CLEAR GROUNDS:- Evidence that the ship, its equipment or its crew does not correspond substantially with requirement of relevant convention or that the master or crew members are not familiar with essential shipboard procedures relating to the safety of ship or prevention of pollution.     Clear grounds to conduct a more detailed inspection include:- 1) The absence of principal equipment or arrangements required by convention :- e.g. MARPOL annex 1 requires that ship above 400 GRT and above must have an OWS with automatically stopping device, if effluent exceeds 15 ppm. Absence of this principal equipment will lead to detention. 2) Evidence from a review of the ship's certificate that it is clearly invalid: - e.g. Safety equipment certificate found invalid since no renewal survey was carried out. 3) Evidence that the ship's logs, manuals or other required documentation are not on board, are not maintained or falsely maintained:- e.g. ORB part 1 not present on board or i...
    Read more